Additional hot air exchanger for hot air stoves HEATER.
Total height 500 mm and cylinder diameter 320 mm.
Max. efficiency up to 60% depending on the power of the hot air stoves.
Heat-air exchangers for stoves are intended for a more perfect use of the excessive temperature of flue gases, which would otherwise escape (run away) into the chimney. However, the air heat exchanger takes the residual heat from the outgoing flue gas and transfers radiant and conventional heat to the heated space. This will significantly increase the efficiency of the stove and at the same time reduce the total heating costs. Our hot air exchanger converts this loss into performance and thus reduces heating costs by up to 15%. HEATER heat exchangers are intended for all types of stoves.
For more accessories for HEATER hot air stoves, go to the accessories section, e.g. to purchase a HEATER stove stand or a HEATER hot air stove cover.
36 month warranty.
Unfortunately, the forwarding company TOPTRANS cannot collect cash on delivery abroad, so the goods can only be paid for by bank transfer (does not apply to the Czech Republic).
In stock / within 5 days
HEATER hot air wood stoves have a flue gas temperature of approx. 270° C - 360° C. This unused heat is discharged into the air through the chimney, but thanks to the hot air exchanger on the flue, you can use this heat and increase the efficiency of the stove.
Thanks to the channels in the wall of the heat exchanger, it is a flow of cold air, which enters the channels in the exchanger from the side, where it is heated, and then the heated air leaves the heated space. The heat exchanger is simply inserted between the flues.
1 815 Kč
2 904 Kč
4 840 Kč
2 420 Kč
2 662 Kč
4 140 Kč
4 370 Kč
4 600 Kč